Reaction(SCITE Seminar)

The Student Conference in Information Technology Education(SCITE 2008) held a Seminar last August 21, 2008 at Paskuhan Village, City of San Fernando, Pampanga. The topics that they discussed were very interesting and will surely add to your knowledge about the latest trends in technology. This kind of activity will be of great help to you in the future.

The topics that were discussed are; Cyber Crimes, Voices in Animation, Game Development, Latest Trends in Hardware and Software and Outsourcing and Offshoring.

Engineer Gilbert Raymund Sison discussed about Cyber Crimes. He tells something about malwares, such as viruses, worms, trojans, spams, dialers, keyloggers, spyware, adware, hacking attacks and phishing. He introduced some of the suspicious website in which we can get some of these malwares and also taught us how to avoid them.

Voices in Animation was introduced by Mr.Pocholo Gonsalez, a known voice animator in the country. He showed us some videos about voice dubbing and taught us voice acting by using some of our body parts.

Another topic which is the Game Development was discussed by Mr. Ser Chay Hang. He discussed about the game creation flow, and who are the people behind Game development.

One of the topics that I really enjoyed was the Latest Trends in Hardware and Software. Mr. Tim Vergel de Dios showed us some of the latest hardware and software of today, such as the virtual notebooks, Microsoft Silverlight. Microsoft Expression Design, and MS Worldwide Telescope. He also taught us how to use some of them.

As an attendee I can say that the said seminar is a success. I really enjoyed the topics that were discussed, and learn from them. The only problem is the sound system, some of the speakers are not clearly heard.

Lab 3.9.2 Boot the Computer

In this lab, you will boot the computer for the first time, explore the BIOS setup program, and change the boot order sequence.

Recommended Equipment
•Assembled computer without an operating system installed
•Motherboard manual


Step 1
Plug the power supply cable into an AC wall outlet.

Turn on the computer.

NOTE: If the computer beeps more than once, or if the power does not come on, notify your instructor.

Step 2
During POST, press the BIOS setup key or key combination.

The BIOS setup program screen will appear.

What is the key or combination of keys used to enter the BIOS setup program?
Delete Key

Who manufactures the BIOS for your computer?
AMBIOS 0314
05/07/07

What is the BIOS version?
Version 0314

What menu options are available?
Main -Advance -Power -Boot -Exit

Step 3
Navigate through each screen to find the boot order sequence.

What is the first boot device in the boot order sequence?
The first boot device in the boot order sequence is the CD-ROM

How many additional devices can be assigned in the boot order sequence?
There are three additional devices that can be assigned in the boot order sequence

Step 4
Ensure that the first boot order device is the optical drive.

Ensure that the second boot order device is the hard disk drive.

Why would you change the first boot device to the optical drive?
If you are installing a new Operating System.

What happens when the computer boots and the optical drive does not contain bootable media?
It continues to boot until it reaches the desktop.

Step 5
Navigate through each screen to find the power management setup screen, or ACPI screen.

What power management settings are available?
The power management settings available are:

Suspend Mode --------------Auto
ACPI 2.0 Support ---------Disabled
ACPI APIC support ------- Disabled

Step 6
Navigate through each screen to find the PnP settings.

What PnP settings are available?
Option ---------------------- Setting
Plug and Play OS installed -- No
DMA 1 used by ISA ----------- No/ICU
Slot 1 IRQ ---------------------- NA
DMA 3 used by ISA ----------- No/ICU
Slot 2 IRQ ---------------------- 9
DMA 5 used by ISA ----------- No/ICU
Slot 3/audio IRQ -------------- 0
Slot 4/5 IRQ ------------------- 15
ISA MEM block BASE -------- No/ICU
PCI latency timer -------------- 0 PCI Clock
SYMBIOS Small Computer System
Interface (SCSI) BIOS -------- Disabled
IRQ 3 used by ISA ------------ No/ICU
USB function ----------------- Enabled
IRQ 4 used by ISA ------------- No/ICU
USB IRQ ------------------------ 15
IRQ 5 used by ISA ---------------- Yes
VGA BIOS sequence ------------- PCI/AGP
IRQ 7 used by ISA ------------ No/ICU
IRQ 9 used by ISA ------------ No/ICU
IRQ 10 used by ISA ------------- No/ICU
IRQ 11 used by ISA ------------------ Yes
IRQ 12 used by ISA -------------- No/ICU
IRQ 14 used by ISA --------------- No/ICU
IRQ 15 used by ISA --------------- No/ICU


Step 7
Save the new BIOS settings and exit the BIOS setup program.

Step 8
The computer will restart.

An operating system can be installed at this time.

This lab is complete. Please have the instructor verify your work.

Lab 3.8.2 Complete the Computer Assembly

In this lab, you will install the side panels and the external cables on the computer.

Recommended Equipment
•Computer with power supply, motherboard, drives, and adapter cards installed, and internal cables connected
•Monitor cable (DVI or VGA)
•Keyboard
•Mouse
•USB cable for the USB hub
•USB cable for the USB printer
•Network cable
•Wireless antenna
•Power cable
•Tool kit
•Motherboard manual

Step 1
Attach the side panels to the computer case.

Secure the side panels to the computer using the panel screws.

Step 2
Attach the monitor cable to the video port.

Secure the cable by tightening the screws on the connector.

Step 3
Plug the keyboard cable into the PS/2 keyboard port.

Step 4
Plug the mouse cable into the PS/2 mouse port.

Step 5
Plug the hub USB cable into any USB port.

Step 6
Plug the printer USB cable into a USB port in the hub.

Step 7
Plug the Ethernet cable into the Ethernet port.

Step 8
Connect the wireless antenna to the antenna connector.

Step 9
Plug the power cable into the power socket of the power supply.

Lab 3.7.2 Install Internal Cables

In this lab, install the internal power and data cables in the computer.

Recommended Equipment
•Computer with power supply, motherboard, drives, and adapter cards installed
•Hard disk drive data cable
•Optical drive data cable
•Floppy drive data cable
•Antistatic wrist strap and antistatic mat
•Tool kit
•Motherboard manual

Step 1
Align the motherboard power supply connector to the socket on the motherboard.

Gently press down on the connector until the clip clicks into place.

Step 2
NOTE: This step is necessary only if your computer has an auxiliary power connector.

Align the auxiliary power connector to the auxiliary power socket on the motherboard.

Gently press down on the connector until the clip clicks into place.

Step 3
Plug a power connector into the hard disk drive, optical drive, and floppy drive. Ensure that the floppy drive power connector is inserted right side up.

Step 4
NOTE: This step is necessary only if your computer has a fan power connector.

Connect the fan power connector into the appropriate fan header on the motherboard.

Step 5
NOTE: Pin 1 on a PATA cable must align with Pin 1 on the motherboard connector and the hard disk drive connector.

Align and plug the hard disk drive data cable into the motherboard connector.

Align and plug the other end of the hard disk drive data cable into the hard disk drive connector.

Step 6
NOTE: Pin 1 on a PATA cable must align with Pin 1 on the motherboard connector and the optical drive connector.

Align and plug the optical drive data cable into the motherboard connector.

Align and plug the other end of the optical drive data cable into the optical drive connector.

Step 7
NOTE: Pin 1 on a floppy drive cable must align with Pin 1 on the motherboard connector and the floppy drive connector.

Align and plug the floppy drive data cable into the motherboard connector.

Align and plug the other end of the floppy drive data cable into the floppy drive connector.

This lab is complete. Please have the instructor verify your work.

Lab 3.6.3 Install Adapter Cards

In this lab, you will install a NIC, a wireless NIC, and a video adapter card.
Recommended Equipment
•Computer with power supply, motherboard, and drives installed
•NIC
•Wireless NIC
•Video Adapter Card
•Adapter card screws
•Antistatic wrist strap and antistatic mat
•Tool kit
•Motherboard manual

Step 1
What type of expansion slot is compatible with the NIC?
It uses PCI and PCIe expansion slots on the motherboard

Locate a compatible expansion slot for the NIC on the motherboard.

Remove the slot cover from the back of the case, if necessary.

Align the NIC to the expansion slot.

Press down gently on the NIC until the card is fully seated.

Secure the NIC by attaching the PC mounting bracket to the case with a screw.

Step 2
What type of expansion slot is compatible with the wireless NIC?
Wireless NICs use PCI and PCIe expansion slots on the motherboard. Some wireless NICs are installed externally with a USB connector

Locate a compatible expansion slot for the wireless NIC on the motherboard.

Remove the slot cover from the back of the case, if necessary.

Align the wireless NIC to the expansion slot.

Press down gently on the wireless NIC until the card is fully seated.

Secure the wireless NIC by attaching the PC mounting bracket to the case with a screw.


Step 3
What type of expansion slot is compatible with the video adapter card?
Video adapter cards use PCI, AGP, and PCIe expansion slots on the motherboard.

Locate a compatible expansion slot for the video adapter card on the motherboard.

Remove the slot cover from the back of the case, if necessary.

Align the video adapter card to the expansion slot.

Press down gently on the video adapter card until the card is fully seated.

Secure the video adapter card by attaching the PC mounting bracket to the case with a screw.

This lab is complete. Please have the instructor verify your work.

Lab 3.5.2 Install the Drives

In this lab, you will install the hard disk drive, the optical drive, and the floppy drive.

Recommended Equipment
•Computer case with power supply and motherboard installed
•Antistatic wrist strap and antistatic mat
•Tool kit
•Hard disk drive
•Hard disk drive screws
•Floppy drive
•Floppy drive screws
•Optical drive
•Optical drive screws
•Motherboard manual

Step 1
Align the hard disk drive with the 3.5 inch drive bay.

Slide the hard disk drive into the bay from the inside of the case until the screw holes line up with the holes in the 3.5 inch drive bay.

Secure the hard disk drive to the case using the proper screws.

Step 2
Note: Remove the 5.25 inch cover from one of the 5.25 inch external drive bays if necessary.

Align the optical drive with the 5.25 inch drive bay.

Insert the optical drive into the drive bay from the front of the case until the screw holes line up with the holes in the 5.25 inch drive bay and the front of the optical drive is flush with the front of the case.

Secure the optical drive to the case using the proper screws.

Step 3
Note: Remove the 3.5 inch cover from one of the 3.5 inch external drive bays if necessary.

Align the floppy drive with the 3.5 inch drive bay.

Insert the floppy drive into the drive bay from the front of the case until the screw holes line up with the holes in the 3.5 inch drive bay and the front of the floppy drive is flush with the front of the case.

Secure the floppy drive to the case using the proper screws.

This lab is complete. Please have the instructor verify your work.

Lab 3.3.3 Install the Motherboard

In this lab, you will install a CPU, a heat sink/fan assembly, and a RAM module on the motherboard. You will then install the motherboard in the computer case.

Recommended Equipment
•Computer case with power supply installed
•Motherboard
•CPU
•Heat sink/fan assembly
•Thermal compound
•RAM module(s)
•Motherboard standoffs and screws
•Antistatic wrist strap and antistatic mat
•Tool kit
•Motherboard manual


Step 1

Place the motherboard, the CPU, the heat sink/fan assembly and the RAM module on the antistatic mat.


Step 2

Put on your antistatic wrist strap and attach the grounding cable to the antistatic mat.

Locate Pin 1 on the CPU. Locate Pin 1 on the socket.

NOTE: The CPU may be damaged if it is installed incorrectly.

Align Pin 1 on the CPU with Pin 1 on the socket.

Place the CPU into the CPU socket.

Close the CPU load plate and secure it in place by closing the load lever and moving it under the load lever retention tab.


Step 3
Apply a small amount of thermal compound to the CPU and spread it evenly.

NOTE: Thermal compound is only necessary when not included on the heat sink. Follow all instructions provided by the manufacturer for specific application details.


Step 4

Align the heat sink/fan assembly retainers with the holes on the motherboard around the CPU socket.

Place the heat sink/fan assembly onto the CPU and the retainers through the holes on the motherboard.

Tighten the heat sink/fan assembly retainers to secure it.

Plug the fan connector into the motherboard. Refer to the motherboard manual to determine which set of fan header pins to use.


Step 5

Locate the RAM slots on the motherboard.

In what type of slot(s) will the RAM module(s) be installed?
-Memory Bank


How many notches are found on the bottom edge of the RAM module?
-One

Align the notch(es) on the bottom edge of the RAM module to the notches in the slot.

Press down until the side tabs secure the RAM module.

Ensure that none of the RAM module contacts are visible. Reseat the RAM module if necessary.

Check the latches to verify that the RAM module is secure.

Install any additional RAM modules using the same procedures.


Step 6

Install the motherboard standoffs.

Align the connectors on the back of the motherboard with the openings in the back of the computer case.

Place the motherboard into the case and align the holes for the screws and the stand-offs. You may need to adjust the motherboard to line up the holes for the screws.

Attach the motherboard to the case using the appropriate screws.


Step 7
Connect the wires from the case link lights and buttons to the motherboard connectors.


This lab is complete. Please have the instructor verify your work.
Posted by Bars at 7:06 AM