Thursday, August 28, 2008

Lab 3.9.2 Boot the Computer

In this lab, you will boot the computer for the first time, explore the BIOS setup program, and change the boot order sequence.

Recommended Equipment
•Assembled computer without an operating system installed
•Motherboard manual


Step 1
Plug the power supply cable into an AC wall outlet.

Turn on the computer.

NOTE: If the computer beeps more than once, or if the power does not come on, notify your instructor.

Step 2
During POST, press the BIOS setup key or key combination.

The BIOS setup program screen will appear.

What is the key or combination of keys used to enter the BIOS setup program?
Delete Key

Who manufactures the BIOS for your computer?
AMBIOS 0314
05/07/07

What is the BIOS version?
Version 0314

What menu options are available?
Main -Advance -Power -Boot -Exit

Step 3
Navigate through each screen to find the boot order sequence.

What is the first boot device in the boot order sequence?
The first boot device in the boot order sequence is the CD-ROM

How many additional devices can be assigned in the boot order sequence?
There are three additional devices that can be assigned in the boot order sequence

Step 4
Ensure that the first boot order device is the optical drive.

Ensure that the second boot order device is the hard disk drive.

Why would you change the first boot device to the optical drive?
If you are installing a new Operating System.

What happens when the computer boots and the optical drive does not contain bootable media?
It continues to boot until it reaches the desktop.

Step 5
Navigate through each screen to find the power management setup screen, or ACPI screen.

What power management settings are available?
The power management settings available are:

Suspend Mode --------------Auto
ACPI 2.0 Support ---------Disabled
ACPI APIC support ------- Disabled

Step 6
Navigate through each screen to find the PnP settings.

What PnP settings are available?
Option ---------------------- Setting
Plug and Play OS installed -- No
DMA 1 used by ISA ----------- No/ICU
Slot 1 IRQ ---------------------- NA
DMA 3 used by ISA ----------- No/ICU
Slot 2 IRQ ---------------------- 9
DMA 5 used by ISA ----------- No/ICU
Slot 3/audio IRQ -------------- 0
Slot 4/5 IRQ ------------------- 15
ISA MEM block BASE -------- No/ICU
PCI latency timer -------------- 0 PCI Clock
SYMBIOS Small Computer System
Interface (SCSI) BIOS -------- Disabled
IRQ 3 used by ISA ------------ No/ICU
USB function ----------------- Enabled
IRQ 4 used by ISA ------------- No/ICU
USB IRQ ------------------------ 15
IRQ 5 used by ISA ---------------- Yes
VGA BIOS sequence ------------- PCI/AGP
IRQ 7 used by ISA ------------ No/ICU
IRQ 9 used by ISA ------------ No/ICU
IRQ 10 used by ISA ------------- No/ICU
IRQ 11 used by ISA ------------------ Yes
IRQ 12 used by ISA -------------- No/ICU
IRQ 14 used by ISA --------------- No/ICU
IRQ 15 used by ISA --------------- No/ICU


Step 7
Save the new BIOS settings and exit the BIOS setup program.

Step 8
The computer will restart.

An operating system can be installed at this time.

This lab is complete. Please have the instructor verify your work.

No comments: